AiM XLog is a compact, high-precision data logger that records vehicle and engine data via CAN bus, RS232, or K-Line. It also features an integrated GPS module, a lithium battery, and a 6-axis IMU to capture speed, position, acceleration, and vehicle attitude.
The data is stored on the internal 4 GB memory and — if connected — additionally on a USB-C stick (up to 16 GB). Thanks to its compact design, the
AiM XLog can be used not only in automotive applications but also in motorcycle or off-road environments.
Modules such as the ACC3, lambda controller, SmartyCam 3, or other extensions can be connected via the internal AiM CAN bus.
CAN-Bus Technology
Features XLog
- 4 GB storage (expandable on up to 16 GB)
- 3 CAN interfaces
- ECU Interface (CAN-Bus, RS232, K-Line and OBDII)
- RPM input
- Integrated GPS Module
- 6-axis IMU (Acceleration and Gyroscope)
- WiFi, Bluetooth and USB-C
- Lithium battery (10 hours)
Connection example AiM XLog
Technical data AiM XLog
| Tachometer |
Tapping from the control unit, from the clamp 1 of the ignition coil or CAN/RS 232/OBDII/K-Line
Measuring range 0 up to 22.000 rpm
Scale end adjustable (x 1000): 4 - 6 - 7 - 8 - 10 - 12 - 14 - 15 - 16 - 18 - 20 - 22
Sampling rate 10 - 50 Hz, free arbitrary |
| Time measurement |
Triggered by GPS
Lap times without limit, up to 5 intermediate times
Accuracy of measurement: 1/100 sec. |
| Acceleration |
triaxial ± 5 g and gyroscope integrated in the logger
Sampling rate 10 – 100 Hz, arbitrary |
| Connector |
1x Binder 711, 8-pin
1x Binder 711, 5-pin
1x USB-C |
| Data memory |
non-volatile 4 GB memory |
| Data transfer |
USB-C, WiFi and Bluetooth |
| Power supply |
internal lithium battery (10 hours)
over 12 V main power supply
ignition switch for on and off
no data loss after switching off |
| Updates |
Software- and Firmware updates gratis on the Internet |
| Admeasurements |
72.3 x 65.3 x 30.3 mm |
| Weight |
150 gr. |
| Protection class |
IP65 |
Inputs on the XLog
 |
| 1 |
Input USB-C |
2 |
Input for Binder 711, 8-pin |
3 |
Input for Binder 711, 5-pin |
| 4 |
On / Off switch |
5 |
Status LED |
6 |
4x M4 fixing points |
Highlights AiM XLog
 |
 |
 |
Housing
The AiM XLog has a black glass fiber reinforced PA6 housing.
|
Software | RaceStudio3
With RaceStudio3 the XLog can be configured, the recorded data can be downloaded and analyzed.
|
Connectors
The XLog has a Binder 711-8 pin connector for ECU as well as a Binder 711 5-pin for the expansions.
|
| |
|
|
 |
 |
 |
USB connection
The XLog can be configured, calibrated or the data downloaded in conjunction with RaceStudio3 via USB-C connection.
|
WiFi & Bluetooth connection
The XLog can be configured, calibrated or the data downloaded in conjunction with RaceStudio3 via the secure 802.11 WiFi connection. Additionaly you can connect Bluetooth devices. |
Button
The XLog can be switched on/off with a button. The status led indicate different informations.
|
| |
|
|
Expansions for XLog
RaceStudio 3 AiM XLog
 |
 |
 |
Channels
XLog hasn't own analog / digital channels, but you can do some settings under the channels.
|
ECU Stream
ECU Streams from over 2.000 manufacturers are now stored in RaceStudio 3. Select them and send it to the ECULog. |
Expansions
The respective Expansion for the AiM XLog can be selcted and configred.
|
| |
|
|
 |
 |
 |
Math. channels
The calculation for math. channels is configured in RaceStudio 3 and can be logged on XLog.
|
Status variables
The status variables can be used to create a channel that displays 0 or 1 via various conditions. This can be used to create diagnostic channels. |
Analysis
All downloaded data is stored in RaceStudio 3 analysis. Everything from time/distance, X/Y plot to the data report can be freely set.
|
| |
|
|
Accessory for XLog
 |
 |
 |
 |
 |
 |
 |
| Mounting |
Acceleration |
Movement |
RPM |
Pressure |
Speed |
Hubs |
 |
 |
 |
 |
|
|
|
| Cable |
Lap time |
Connector |
Temperature |
|
|
|