Solo 2 DL Plug & Play Kits for Yamaha R1 15, R6 17
Our CAN Bus capable devices can now communicate with the Yamaha motorbikes of the models R1 2015 and R6 2017. Using a special connection cable, we can tap the channels listed below via the engine control unit. Since no further steps are necessary for the customer other than plugging the model-specific cable into a plug that is standard in the vehicle and configuring the respective logger, we refer to these kits as plug & play.
In principle, however, our devices can be installed in any vehicle, even if there is no p&p version for it. If your model is not listed, please contact us and we will help you.
Supported models
| Yamaha YZF-R1/R1M |
from 2015 |
| Yamaha YZF-R6 (YEC) |
from 2017 |
Channels over CAN-Bus
| Front speed |
Launch control setting |
| Rear speed |
Slide control setting |
| Engine speed |
Quick Shift |
| Traction control setting |
ABS rear |
| Gear |
ABS front |
| Power setting |
Mapping |
| Throttle valve |
Water temperature |
| Throttle grip position |
Intake air temperature |
| Wheelie control setting |
Brake pressure front / rear |
Installation using the example Solo 2 DL