Plug & Play Kits for BMW S models
Our CAN Bus capable devices can now communicate with the BMW motorbikes of the models S. Using a special connection cable, we can tap the channels listed below via the engine control unit. Since no further steps are necessary for the customer other than plugging the model-specific cable into a plug that is standard in the vehicle and configuring the respective logger, we refer to these kits as plug & play.
In principle, however, our devices can be installed in any vehicle, even if there is no p&p version for it. If your model is not listed, please contact us and we will help you.
Supported models
| BMW S1000RR |
2009 - 2014 |
| BMW S1000RR |
from 2015 |
| BMW S1000RR HP4 |
2013 - 2014 |
Channels over CAN-Bus
| Engine speed |
Vertical acceleration |
| Throttle valve |
Traction control engagement |
| Gear |
Traction control status |
| Neutral |
Clutch switch |
| Water temperature |
Side stand status |
| Selected mapping |
Front brake switch |
| Engine control light |
Rear brake switch |
| Front speed |
Linear acceleration |
| Throttle grip position |
Oil pressure switch |
| Rear speed |
Engine immobiliser |
| Intake air temperature |
Brake error |
| Yaw rate |
Status ABS |
| Rolling rate |
Menu Mapping |
| Lateral acceleration |
|
BMW DWA connector
Installation using the example Solo 2 DL
- Connect the "Solo 2 DL connection cable for BMW S1000RR, K models" to your Solo 2 DL via the 7-pin Binder 711 connector. It is the lower right input of your Solo 2 DL.
- Lay the connection cable from the front to where your passenger would normally be
- There, under the seat, you will find a black 8-pin connector. This is for the anti-theft alarm system (DWA) and is connected to the CAN bus and 12V cables.
- Connect this black plug to our white one on the connection cable.
- Use the RaceStudio3 software to create a new configuration for your Solo 2 DL and select as ECU Manufacturer: BMW and as ECU Model: BIKE_S1000RR.
- Connect your Solo 2 DL to your PC via WLan.
- Transfer the configuration to the AiM Solo 2 DL.
- You can check the communication via the online mode.