Mess- und Prüftechnik für
Industrie, Motorsport und Fahrzeugentwicklung

The latest development from AiM is called Solo 2 . Available in two versions, it can either be used as a pure GPS-Lap timer or as a data storage device.

The version Solo 2 disposes over all functions, which are needed for Operations like for example Dragster, Circuit, mountain race... Over USB the wanted track coordinates are transmitted to the SOLO 2 or the driven measurement data to the analyses to the PC. Thanks to the 12V connection, it can also be supplied over the power supply network through an internal battery.

The version Solo 2 DL has additional an integrated data logger, which records, shows and safes the data via OBD II or vehicle—CAN-bus (at the moment AiM can communicate with approx. 2.000 control units).

The Dash logger as also the lap timer, disposes over an internal 3 axis acceleration sensor, gyroscope, magnetometer and an integrated 25 Hz GPS. The internal ring memory summarizes 4 GB and can record with a sum scan rate from 5.000 Hz with 12bit recording resolution.

Special features Solo 2 DL

• Lap times with up to 5 split times
• Triaxial acceleration sensor, gyroscope, magnetometer
• Rechargeable lithium battery
• 10 configurable RGB shift lights
• 4 GB storage
• Integrated GPS module
• Various modes (circuit, hill climbs, point to point)
• ECU interface CAN, K-Line, RS232, OBDII (only SoloDL)

Connection example Solo 2 DL

Technical data AiM Solo 2 DL

Functions of the Solo 2 DL

Features SoloDL

Solo shows the best and current lap time on one page. Over the lap projection the driver is continuously informed over his to achieving lap time.		It is also possible to indicate the time projection as difference. In the regularity mode it can be determined, which lap is to be taken for this.

On the free configurable display 4 pages with up to 4 measurement values can be showed.		With the version DL additional the channels of the engine control unit can be showed.

Solo recognizes automatically on which track you are. If there should be more track varieties available, Solo asks you to select the correct track. Likewise it is possible, to determine the sectors over the Solo.		After driving you can view in the data recall your lap times and further information. All tests which are contained in the storage are shown.

Mounting

		A ball flange with 2x M5 holes can be attached to the holder of the AiM Solo 2 DL. This can be used to attach the Solo 2 DL to the vehicle using either a suction cup or a pipe claw. In addition, the AiM Solo 2 DL can be secured with a wire rope.
		more infos

Expansions for Solo 2 DL

Accessory for Solo 2 DL

Mounting	Data Hub	Cable	Connector

---

---

• AiM Solo 2 DL
• Charging device
• Magnet holder
• German user manual
• 2 years warranty
• selectively with connection cable CAN/Kline, CAN/RS232, RPM or OBDII