Mess- und Prüftechnik für
Industrie, Motorsport und Fahrzeugentwicklung

Sie sind hier: Products > AiM > SMC Bridge > ECU Bridge

ECU Bridge

AiM ECU-Bridge
AiM ECU-Bridge
AiM ECU-Bridge
AiM ECU-Bridge
AiM ECU-Bridge
AiM ECU-Bridge
AiM ECU-Bridge
AiM ECU-Bridge
Admeasurements AiM ECU-Bridge
Admeasurements AiM ECU-Bridge
AiM ECU Bridge is an interface module connecting the engine control unit (ECU) to an AIM Display as well as to the SmartyCam, whenever a Datalogger is not available.

The ECU Bridge does not possess an internal storage and therefore it can’t save ECU-data, which it admittedly provides for the SmartyCam for the overlay in the film, for the analysis with the software RaceStudio 2. These data can be indicated by connecting the ECU Bridge with an AIM Display (M3 – Dash, TG – Dash, Formula Steering Wheel, GT Steering Wheel, MXL-Dash) or (for Overlay) with the SmartyCam.

The AiM ECU Bridge has an USB Port and three cables, two on the right and one on the left hand side. The USB Port makes it possible with the help of a PC via USB-cable to configurate the ECU Bridge. The configuration is done using the free AIM-Software RaceStudio 2, by selecting in the appropriate menu the connected ECU.

Logo CAN-Bus Technologie
CAN-Bus Technology

Special Features ECU Bridge

  • ECU Interface (CAN Bus, RS 232, K-Line, OBD II) 
  • AiM CAN Bus network (EXP)
  • More than 2.000 various ECU’s selectable
  • Online-indication of the measurement values
  • USB port for programming


Connection example ECU Bridge

Anschlussbeispiel ECU Bridge 

Technical Data AiM ECU Bridge

ECU Bridge
Connections Binder Stecker 711, 5-pin - f
Measurement 109,5 x 39 x 17 mm
Output EXP
Housing Aluminium
Weight 220 gr
Protection class IP65

The inputs on the ECU Bridge

Eingänge ECU Bridge
1 Connection to the engine control unit over CAN RS 232 or OBD II 2 12V connection to the on-board power supply of the vehicle 3 USB-port
4 Status LED 5 Connection for expanding the Bridge through for example the SmartyCam

Accessory for the ECU Bridge

AIM Zubehör Hubs AIM Zubehör Kabel
Hubs Cable

Software Updates für AIM Produkte Firmware Updates für AIM Produkte AIM Produkte online kaufen

memotec GmbH | Bauwaldstrasse 1 | D-75031 Eppingen | +49.7260.920440 | |