The new AiM
MyChron5S has unlike ist predecessor a 25Hz GPS-module, higher processing power and a new WiFi-module, making data Transfer much faster than with the MyChron5. It has a high-resolution graphical display for the indication of rpm, speed,lap times, gear, temperature (one or two with the MC5S 2T), satellite reception and the data from the connected expansions as the lambda or MC-Expansion. It is possible to configure several display pages free and to select them over the 4 buttons. The display-illumination can be set in 7 different colors and the brightness is controlled by a light-sensor.
The Speed is gathered over the integrated 25Hz GPS-module, indicated on the display and can later with further GPS-channels, e.g. driven line, acceleration… be analyzed on the PC. The screwed on Lithium battery supplies the
MyChron5 S ten hours with power and can then be either charged or swapped. It also can be supplied by an external battery.
MyChron5S has two in seven various colors configurable Alarm-LEDs and 5 Shift-LEDs. Both Alarm LEDs can be assigned to every arbitrary measurement and shift-LEDs can be set sequentially, in full group and gear-selective. Over the WiFi-Connection the configurations can be transferred, the data downloaded or the measurements online checked.
All sensors and cables from the MyChron4, Mychron5, as also MyChron- Expansion, Lambda-system and SmartyCam can also be used on the
MyChron5S.
CAN-Bus Technology
Special features MyChron5S
- free configurable graphical display
- multicolord configurable background illumination
- 5 RGB shift-lights
- 2 RGB Alarm-lights
- Lap times with up to 5 split times
- Light sensor for the illumination
- integrated 25Hz GPS08 Module
- WiFi connection
- 4 GB storage
- Lithium battery
Connection example AiM MyChron5S
Technical data AiM MyChron5S
| RPM |
Tapping inductive from the ignition cable
Measuring range 0 up to 60.000 rpm |
| Time measurement |
Triggering over infrared, manual or GPS
Lap times without limits, up to 5 Split times
Measuring accuracy 1/100 sec. |
| Analogue channels |
Only over MyChron Expansion |
| Temperature |
1 Input
Thermoelement 0 – 999 °C, measuring accuracy + 0,75%
Thermo resistance up to 180 °C, measuring accuracy + 1°
2 Alarm-LED's when exceeding or falling below the set alarm values
Indication in °C or °F |
| Speed |
Gathering over integrated GPS or MyChron Expansion with sensor |
| gear indication |
Calculated out of rpm and GPS speed |
| Connectors |
1x Binder 711-3 | 1x Binder 711-4 | 1x Binder 711-5 |
| Shift-light |
5 free configurable RGB LEDs
arbitrary for each gear |
| Additional functions |
Displays the difference to the fastest lap at the split times
Lap time projection
WiFi connection
Light sensor for display illumination
Free configurable Display indication
2 RGB Alarm-lights, free configurable
multicolored Background illumination |
| Data storage |
non-volatile 4 GB-storage |
| Data transfer |
WiFi 802.11 |
| Power supply |
internal lithium Battery (10 hours)
optional over external 12V Battery |
| Updates |
Software- and Firmware updates for free over the internet |
| Dimensions |
Housing: 137 x 88 x 47
Display: 94,6 x 46,1 |
| Weight |
340 gr |
The functions of the MyChron5S
 |
| 1 |
2 RGB Alarm lights, free configurable |
2 |
integrated 25Hz GPS Module |
3 |
WiFi Module |
| 4 |
5 RGB shift-lights, free configurable |
5 |
4 Display metal buttons with various functions |
6 |
Analogue rpm indication, free configureable |
| 7 |
Gear indication |
8 |
Light-sensor for illumination |
9 |
RPM indication |
| 10 |
Speed indication |
11 |
Lap time indication |
12 |
free configurable display part |
The connections of the MyChron5S
 |
| 1 |
Connection 3 pin for temperature sensor |
2 |
Connection 4 pin for lap time |
3 |
Connection 5 pin for expansion or power supply |
| 4 |
Connection for rpm sensor |
5 |
Exchangeable lithium battery |
6 |
M8 mounting screw |
Highlights AiM MyChron5S
 |
 |
 |
Housing
The AiM MyChron5S has a black glass fiber reinforced nylon housing.
|
Software | RaceStudio3
With RaceStudio3, MyChron5S recorded data can be downloaded and analyzed.
|
1 Temperature
At the MyChron5S you can connect 1 and by the version 2T 2 temperature sensors.
|
| |
|
|
 |
 |
 |
Alarm lights
The 2 RGB alarm led's can either light up, flash slowly or quickly when a set min. or max value is reached.
|
Shift lights
The 5 RGB shift lights can be set the same for each or all gears. A separate color can be selected for each LED.
|
Display
On MyChron5S 268x128 LCD display all important driver informations can be shown.
|
| |
|
|
 |
 |
 |
Lap times
It can show the lap time, diff +/-, best lap time, lap number and prediction lap time.
|
Data Recall
The data recall shows the most important measurements on the display after the session.
|
Connectors
The MyChron5S has a Binder 711-3 pin, a Binder 711-4 pin and a Binder 711-5 pin.
|
| |
|
|
 |
 |
|
Buttons
The MyChron5S is operated using the four metal buttons. You can navigate through the menu, switch the display pages or use the data recall.
|
WiFi connection
MyChron5S data can be downloaded in conjunction with RaceStudio3 via the secure 802.11 WiFi connection.
|
|
Expansions for MyChron5S
Accessory for MyChron5S
 |
 |
 |
 |
 |
 |
 |
| RPM |
Data Hub |
Cable |
Lap time |
Connector |
Power |
Temperature |