Mess- und Prüftechnik für
Industrie, Motorsport und Fahrzeugentwicklung

Sie sind hier: Products > AiM > MyChron > MyChron5 > MyChron5 Basic


AiM MyChron5
AiM MyChron5
AiM MyChron5
AiM MyChron5
AiM MyChron5
AiM MyChron5
AiM MyChron5
AiM MyChron5
Abmasse AiM MyChron5
Abmasse AiM MyChron5

The AiM MyChron5 has a high-resolution graphical display for the indication of rpm, speed,lap times, gear, temperature (one or two with the MC5 2T), satellite reception and the data from the connected expansions as the lambda or MC-Expansion. It is possible to configure several display pages free and to select them over the 4 buttons. The display-illumination can be set in 7 different colors and the brightness is controlled by a light-sensor

The Speed is gathered over the integrated GPS-Module, indicated on the display and can later with further GPS-channels, e.g. driven line, acceleration… be analyzed on the PC. The screwed on Lithium battery supplies the MyChron5 ten hours with power and can then be either charged or swapped. It also can be supplied by an external battery.

MyChron 5 has two in seven various colors configurable Alarm-LEDs and 5 Shift-LEDs. Both Alarm LEDs can be assigned to every arbitrary measurement and shift-LEDs can be set sequentially, in full group and gear-selective. Over the WiFi-Connection the configurations can be transferred, the data downloaded or the measurements online checked.

All sensors and cables from the MyChron4, as also MyChron- Expansion, Lambda-system and SmartyCam can also be used on the MyChron5.

Logo CAN-Bus Technologie
CAN-Bus Technology

Special features MyChron5

  • free configurable graphical display
  • multicolord configurable background illumination
  • 5 RGB shift-lights
  • 2 RGB Alarm-lights 
  • Lap times with up to 5 split times
  • Light sensor for the illumination
  • integrated GPS08 Module
  • WiFi connection
  • 4 GB storage
  • Gyroscope
  • Lithium battery

Connection example AiM MyChron5

Anschlussbeispiel AiM MyChron5

Technical data AiM MyChron5

RPM Tapping inductive from the ignition cable
Measuring range 0 up to 60.000 rpm
Time measurement Triggering over infrared, manual or GPS
Lap times without limits, up to 5 Split times
Measuring accuracy 1/100 sec.
Analogue channels Only over MyChron Expansion
Temperature 1 Input
Thermoelement 0 – 999 °C, measuring accuracy + 0,75%
Thermo resistance up to 180 °C, measuring accuracy + 1°
2 Alarm-LED's when exceeding or falling below the set alarm values
Indication in °C or °F
Speed Gathering over integrated GPS or MyChron Expansion with sensor
gear indication Calculated out of rpm and GPS speed
Connectors 1x Binder 711-3 | 1x Binder 711-4 | 1x Binder 711-5
Shift-light 5 free configurable RGB LEDs
arbitrary for each gear
Additional functions

Displays the difference to the fastest lap at the split times
Lap time projection
WiFi connection
Light sensor for display illumination
Free configurable Display indication
2 RGB Alarm-lights, free configurable
multicolored Background illumination

Data storage non-volatile 4 GB-storage
Data transfer WiFi 802.11
Power supply internal lithium Battery (10 hours)
optional over external 12V Battery
Updates Software- and Firmware updates for free over the internet
Dimensions Housing: 137 x 88 x 47
Display: 94,6 x 46,1
Weight 340 gr

The functions of the MyChron5

Funktionen AiM MyChron5
1 2 RGB Alarm lights, free configurable 2 integrated GPS Module 3 WiFi Module
4 5 RGB shift-lights, free configurable 5 4 Display metal buttons with various functions 6 Analogue rpm indication, free configureable
7 Gear indication 8 Light-sensor for illumination 9 RPM indication
10 Speed indication 11 Lap time indication 12 free configurable display part

The connections of the MyChron5

Anschlüsse AiM MyChron5
1 Connection 3 pin for temperature sensor 2 Connection 4 pin for lap time 3 Connection 5 pin for expansion or power supply
4 Connection for rpm sensor 5 Exchangeable lithium battery 6 M8 mounting screw

Accessory for MyChron5

AIM Zubehör Drehzahl AIM Zubehör Hubs AIM Zubehör Kabel AIM Zubehör Rundenzeit AIM Zubehör Steckverbinder AIM Zubehör Stromversorgung AIM Zubehör Temperatur
RPM Data Hub Cable Lap time Connector Power Temperature

Software Updates für AIM Produkte Firmware Updates für AIM Produkte AIM Produkte online kaufen

memotec GmbH | Bauwaldstrasse 1 | D-75031 Eppingen | +49.7260.920440 | |