Abmaße AiM MXm LCD Dashboard
The AiM MXm is the dash logger which provides all the info needed by racers: it samples and shows key info like speed, laptimes, RPM, gears, it has multiple math channels and much more.
Its strengths are the compactness, which makes MXm perfect to be fit into any kind of car and bike, and its plug-and-play usage: complete but simple, MXm is the perfect device for both Pro and Amateaur racers.
MXm samples data coming from your ECU, the internal GPS, 4 fully configurable analog inputs, 3 digital inputs (2 speed inputs + 1 coil RPM input) and predefined math channels.
CAN-Bus Technologie
Special features MXm
- 4 free configurable analog inputs
- 7 RGB LEDs
- 2 15A power outputs
- Wi-Fi connection
- Laptimes with up to 5 split times
- 2 speed inputs
- Gear view
- Daily and overall kilometers
- 4 GB storage
- 2 CAN interfaces
- ECU Interface (CAN, RS232 oder OBDII)
Connection example MXm
Technical data AiM MXm
| RPM |
Tapping from the ECU, from the clamp 1 of the ignition coil or CAN/RS 232/OBDII
Measuring range 0 up to 22.000 RPM
Scale end adjustable (x 1000): 4 - 6 - 7 - 8 - 10 - 12 - 14 - 15 - 16 - 18 - 20 - 22
Sampling rate 10 - 50 Hz, free arbitrary
free configurabel over-revs-controll-LED |
| Time keeping |
Triggering over GPS
Laptimes without limit, up to 5 split times
Measuring accuracy 1/100 sec.
Lap time projection |
| Analog channels |
4 inputs (0-5 V, 12 bit)
Thermocouple 0 –1200°C, Measuring accuracy + 0,75%
Thermo resistance up to 180 °C, Measuring accuracy + 1°
2 RGB Alarm-LED's when failing below or exceeding the set alarm values
Anzeige in °C oder °F
Abtastrate 1 – 1000 Hz, frei wählbar
Tages- und Gesamtkilometerzähler |
| Speed |
2 digital inputs
Recording over inductive wheel rotational sensor ABS, CAN/RS 232/OBDII
0 – 438, Indication in km/h or mph
Sampling rate 10 - 100 Hz, free arbitrary |
| Calculations |
With mathematical channels possible |
| Gear indication |
Calculates out of rpm and speed, captures over gear sensor or CAN/RS232/OBDII |
| Total sampling rate |
5.000 Hz (without ECU) |
| Connector |
1x Autosport 37 pin | Souriau 8STA61435SN | Deutsch AS61435SN
1x DTP 06-4S
1x Mini USB on the wiring harness |
| Shift light |
5 free configurable RGB LEDs
For each gear free configurable |
| Additional functions |
Indication of the difference to the fastest lap with split times
Lap time projection
Wifi connection
Light sensor for display illumination
2 15A power outputs
Calculated channels
Free configurable indication
|
| Data storage |
Non volatile 4GB storage |
| Data transfer |
WiFi 802.11 or USB |
| Power supply |
over 12V on-board power supply
ON / OFF over ignition switch
no data loss after powering off |
| Updates |
Software and firmware updated for free over RaceStudio3 or internet |
| Measurements |
Housing: 137 x 88,4 x 31,9 mm
Display: 94,6 x 46,1 mm |
| Weight |
330 gr |
| Protection class |
IP65 |
The functions of MXm
 |
| 1 |
2 RGB alarm lights, free configurable |
2 |
5 RGB shift lights, free configurable |
3 |
4 Display buttons with various functions |
| 4 |
Light sensor for display illumination |
5 |
Analog RPM indication, free configurable, under RPM digital |
6 |
Indication of analog channels |
| 7 |
Lap number and lap time functions |
|
|
|
|
The connectors of MXm
 |
| 1 |
4x fixing points, M4 |
2 |
Deutsch AS 37 pin, main harness |
3 |
Deutsch DTP06-4 pin, power outputs |
| 4 |
Integrated GPS Module |
|
|
|
|
Wi-Fi Connection
Over the secure 802.11 WiFi connection the MXm can in conjunction with the RaceStudio3 be configured, calibrated or the data can be downloaded.
Two 15A power outputs
The AiM MXm provides two 15A power outputs over one connector. This can be configured by yourself, that it turns on a connected component at a specific analog or digital event
 |
| Example | Condition | Action |
|---|
| Analog event |
Water temperature > 90° |
Turn on the fan |
| Digital event |
Luminosity < 40% |
Turn on the lights |
Expansions for AiM MXm
 |
SmartyCam 3 Sport
|
- Full HD Video
- Data Overlay
|
|
more 
|
Accessory for MXm
 |
 |
 |
 |
 |
 |
|
| Movement |
Pressure |
Speed |
Cable |
Connectors |
Temperature |
|
Overview Dash logger
|
 |
 |
| MXS 1.3 | MXm |
|---|
| Versorgung |
| Power supply |
9 - 15 VDC |
9 - 15 VDC |
| Power consumption mA (max.) |
400 |
400 |
| Eingänge |
| Analogue [optional] |
8 [40] |
4 [] |
| ECU (CAN) |
120 |
150 |
| Digital [optional] |
6 [24] |
3 [] |
| Thermocouple [optional] |
0 [48] |
4 [] |
| Speed |
4 |
2 |
| Keyboard external |
optional |
optional |
| Ausgänge |
| Signal |
2 |
2 |
| Reference voltage |
5V |
5V |
| Kommunikation |
| CAN Interface |
3 |
2 |
| K-Line |
x |
x |
| RS232 |
x |
x |
| USB |
x |
x |
| Lap time |
x |
x |
| Speicher |
| Storage in GB [optional] |
4 [32] |
4 [] |
| Total sampling rate |
8.950 |
5.000 |
| Sampling rate per channel |
1.000 Hz |
1.000 Hz |
| Sonstiges |
| Acceleration sensor |
- |
- |
| Connector |
DEUTSCH 37 & 22 pin
Binder 711 5 pin |
DEUTSCH, DTP 06-4S |
| MOT approval |
o |
- |
| Measurement |
169,4 x 97 x 23 mm |
137 x 88 x 31,9 mm |
| Weight |
530 gr |
330 gr |
| Protection class |
IP65 |
IP65 |
| Expansion |
| GPS |
o |
x |
| Lambda |
o |
o |
| Displays |
o |
- |
| SmartyCam |
o |
o |
| TC-Hub |
10 |
10 |
| Channel Expansion |
10 |
10 |
| Memory Module |
o |
- |
| Remote Control Module |
o |
- |
| Shift Light Module |
o |
o |
| RIO02 |
o |
- |
x = Serienmäßig | o = optional | - = nicht möglich | Zahl = Anzahl