Mess- und Prüftechnik für
Industrie, Motorsport und Fahrzeugentwicklung

Sie sind hier: Products > AiM > MXT > MXT 1.3 Strada

MXT 1.3 Strada

AiM MXT 1.3 Strada
AiM MXT 1.3 Strada
AiM MXT 1.3 Strada
AiM MXT 1.3 Strada
AiM MXT 1.3 Strada
AiM MXT 1.3 Strada
AiM MXT 1.3 Strada
AiM MXT 1.3 Strada
Admeasurements AiM MXT 1.3 Strada
Admeasurements AiM MXT 1.3 Strada
The AiM MXT 1.3 Strada is a free configurable 10“ TFT-display without data recording. It has 6 icons, 10 configurable RGB shift-lights, three CAN connections und two of them to receive data from over 2000 ECUs of the industry-leading ECU manufacturers.

The basic equipment of the new generation of displays from AiM naturally also includes the possibility of connecting an analogue camera that supplies images to the display. It also has 8 analogue inputs, 1 speed input, 3 CAN connections, an input for lap times and 2 digital outputs as well as an input for a rear view camera.

All this is housed in a waterproof aluminium case with new sealed aluminium side-mounted buttons for quick and easy interaction without the need for a PC. Any number of display pages can be created and displayed on the AiM MXT 1.3 Strada.

Logo CAN-Bus Technologie
CAN-Bus Technology

Special features MXT 1.3 Strada

  • 8 free configurable analogue inputs
  • 10 RGB Shift lights
  • 6 icons for road traffic
  • Lap time with up to 5 split times
  • 1 speed input
  • 3 CAN interfaces
  • ECU Interface (CAN, RS232, OBDII
  • Input for rear camera

Connection example AiM MXT 1.3 Strada

Connection example AiM MXT Strada

Technical Data AiM MXT 1.3 Strada

Rev counter Tapping from the control unit, from the clamp 1 of the ignition coil or CAN/RS 232/OBDII
Measuring range 0 up to 22.000 rpm
Scale end adjustable (x 1000): 4 - 6 - 7 - 8 - 10 - 12 - 14 - 15 - 16 - 18 - 20 - 22
Sampling rate 10 - 50 Hz, free arbitrary
free configurable over-revs-control-LED
Time measurement Triggering over infrared, manual or GPS
lap times without limit, up to 5 split times
Measuring accuracy 1/100 />Lap time projection
Analogue channels 8 inputs (0-5 V, 12 bit)
Thermocouple 0 –1200°C, Measuring accuracy + 0,75% , optional with TC-Hub
Thermo resistance up to 180 °C, measuring accuracy + 1°
6 RGB Alarm-LED's when falling below or exceeding the set alarm values
Indication in °C or °F
Sampling rate 1 – 1000 Hz, free arbitrary
Trip and total odometers
Speed 1 digital input
Recording over inductive wheel rotational sensor ABS, CAN/RS232/OBDII
0 – 438, Indication in km/h or mph
Sampling rate 10 - 50 Hz, free arbitrary
Calculations With mathematical channels possible
Gear indication Calculates out of rpm and speed, captures over gear sensor or CAN/RS232/OBDII
Total sampling rate 8950 Hz (without ECU)
Connector  1x AMP 14pin 
1x AMP 23pin 
1x Binder 711 5 pin
1x Mini-USB am on the wiring harness
Shift Light 10 free configurable RGB LED's
for each gear free configurable
Additional function Indication of the difference to fastest lap with the split times
Lap time projection
Wifi connection
Light sensor for display illumination 
1 digital output
Calculated channels
Free configurable indication
Data Storage Optional with Strada Logger
Data transfer USB
Power supply over 12V on-board power supply
On / Off over ignition switch
no data loss after power-off
Updates Software- and Firmware for free over the internet
Measurements 278 x 135 x 43,2 mm
Weight 1.200 gr
Protection class IP 65

The functions of MXT 1.3 Strada

Functions AiM MXT Strada
1 6 different icones, for road traffic 2 10 RGB shift lights, free configurable 3 Display pages, free configurable
4 Window for information 5 Light-sensor for illumination 6 4 Display Buttons with various functions

The connectors of MXT 1.3 Strada

Connectors AiM MXT Strada
1 4x fixing points, M4 2 AMP 23 pin, extension harness 3 AMP 14 pin, main harness
4 Binder 711 5 pin, mirror camera

Highlights AiM MXT 1.3 Strada

Highlights AiM MXT Strada Housing Highlights AiM MXT Strada Software RaceStudio3 Highlights AiM MXT Strada Rear view camera

The AiM MXT Strada has a black anodized aluminum housing.

Software | RaceStudio3

With RaceStudio3 the MXT can be configured.

Rear view camera

If a rear view camera is connected, the camera image can be shown on the display.
Highlights AiM MXT Strada icons Highlights AiM MXT Strada Shift lights Highlights AiM MXT Strada Display

Instead of 6 RGB alarm led's, MXT Strada has indicator left/rigt, high beam, engine control, warning and fuel icons.

The 10 RGB shift lights can be set the same for each or all gears. A separate color can be selected for each LED.

Multiple pages can be configured and displayed on the MXT 1280x480 TFT. Warnings can also be displayed.
Highlights AiM MXT Strada Lap times Highlights AiM MXT Strada Data Recall Highlights AiM MXT Strada Connectors
Lap times

It can show the lap time, diff +/-, best lap time, lap number and prediction lap time.

Data Recall

The data recall shows the most important measurements on the display after the session.


The MXT Strada has a 23- and 14-pin AMP connector, as well as a Binder 711 5-pin for the rear view camera.

Highlights AiM MXT Strada Buttons Highlights AiM MXT Strada Acceleration

The MXT Strada is operated using the four metal buttons. You can navigate through the menu, switch the display pages or use the data recall.

The built-in 3D acceleration sensor and gyroscope enable the vehicle's roll, pitch and yaw to be calculated.

Expansions for AiM MXT 1.3 Strada

AiM Data Hub

Data Hub

  • AiM CAN Bus Expansion
  • 4 additional EXP inputs

more more informations for AiM Data Hub

AiM GPS Modul

GPS Module

  • Driven line
  • Lap time
  • Split time
  • Predictive lap time
  • Speed
  • Accelerations

more more informations for AiM GPS Modul



  • Lambda value
  • Lambda probe temp
  • AFR value

more more informations for AiM LCU-2

AiM Channel Expansion

Channel Expansion

  • 4 Analog inputs or
  • 2 Digital inputs

more more informations for AiM Channel Expansion

AiM TC Hub

TC Hub

  • 4 Thermocouple inputs

more more informations for AiM TC Hub

AiM Memory Modul

Memory Module

  • Recording on SD card
  • up to 32 GB SD cards

more more informations for AiM Memory Modul

AiM SmartyCam 3 Dual

SmartyCam 3 Dual

  • Full HD Video
  • Data Overlay
  • 2x bullet cams
  • Video output (SDI)

more more informations for AiM SmartyCam 3 Dual

AiM SmartyCam 3 GP

SmartyCam 3 GP

  • Full HD Video
  • Data Overlay
  • 1x bullet cam
  • Video output (SDI)

more more informations for AiM SmartyCam 3 GP

AiM SmartyCam 3 Corsa

SmartyCam 3 Corsa

  • Full HD Video
  • Data Overlay

more more informations for AiM SmartyCam 3 Corsa

AiM SmartyCam 3 Sport

SmartyCam 3 Sport

  • Full HD Video
  • Data Overlay

more more informations for AiM SmartyCam 3 Sport

AiM Remote Buttons Interface

Remote Buttons Interface

  • 4x Menu buttons
  • 1x Backlight on/off
  • 1x Odometer reset

more more informations for AiM Remote Buttons Interface

AiM Rückfahrkamera

Rear Camera

  • up to 2 pictures
  • Rear view
  • Front view
  • Picture in TFT Dash

more more informations for AiM Rear Camera

AiM Shift Light Modul

Shift Light Module

  • RGB shift ligts
  • Predictive lap time

more more informations for AiM Shift Light Modul

Accessory for MXT 1.3 Strada

AIM accessory fastener systems AIM accessory temperature AIM accessory movement AIM accessory pressure AIM accessory speed AIM accessory hubs AIM accessory cable
Fastener syst. Temperature Movement Pressure Speed Data Hub Cable
AIM accessory lap times AIM accessory connectors
Lap time Connectors

 Software Updates for AiM products  Firmware Updates for AiM products  Buy AiM products online

memotec GmbH | Bauwaldstrasse 1 | D-75031 Eppingen | +49.7260.920440 | |