Admeasurements AiM MXS Strada Light
The
AiM MXS Strada Light is a free configurable 5“ TFT-display without data recording. It has 6 icons, 10 configurable RGB shift-lights, three CAN connections und two of them to receive data from over 2.000 ECUs of the industry-leading ECU manufacturers.
The basic equipment of the new generation of displays from AiM naturally also includes the possibility of connecting an analogue camera that supplies images to the display. It also has 4 analogue inputs, 3 CAN connections as well as an input for a rear view camera.
All this is housed in a waterproof aluminium case with new sealed aluminium side-mounted buttons for quick and easy interaction without the need for a PC. Any number of display pages can be created and displayed on the AiM MXS Strada Light.
CAN-Bus Technology
Special features MXS Strada Light
- 4 free configurable analog inputs
- 10 RGB Shift lights
- 6 icons for road traffic
- Lap time with up to 5 split times
- 3 CAN interfaces
- ECU Interface (CAN or OBDII
- Input for rear camera
Connection example AiM MXS Strada Light
Technical Data AiM MXS Strada Light
| Rev counter |
CAN or K-Line
Measuring range 0 up to 22.000 rpm
Scale end adjustable (x 1000): 4 - 6 - 7 - 8 - 10 - 12 - 14 - 15 - 16 - 18 - 20 - 22
Sampling rate 10 - 50 Hz, free arbitrary
free configurable over-revs-control-LED |
| Time measurement |
Triggering over infrared, manual or GPS
lap times without limit, up to 5 split times
Measuring accuracy 1/100 sec.
Predictive lap time |
| Analogue channels |
4 inputs (0-5 V, 12 bit)
Thermocouple 0 –1200°C, Measuring accuracy + 0,75% , optional with TC-Hub
Thermo resistance up to 180 °C, measuring accuracy + 1°
Indication in °C or °F
Sampling rate 1 – 1000 Hz, free arbitrary
Trip and total odometers |
| Speed |
Recording over CAN or OBDII
0 – 438, Indication in km/h or mph
Sampling rate 10 - 50 Hz, free arbitrary |
| Calculations |
With mathematical channels possible |
| Gear indication |
Calculates out of rpm and speed, captures over gear sensor or CAN/OBDII |
| Total sampling rate |
8950 Hz (without ECU) |
| Connector |
1x AMP 23pin
1x Binder 711 5 pin
1x Mini-USB am on the wiring harness |
| Shift Light |
10 free configurable RGB LED's, for each gear free configurable |
| Additional function |
Indication of the difference to fastest lap with the split times
Lap time projection
Light sensor for display illumination
Calculated channels
Free configurable indication |
| Data Storage |
Optional with Strada Logger |
| Data transfer |
USB |
| Power supply |
over 12V on-board power supply
On / Off over ignition switch
no data loss after power-off |
| Updates |
Software- and Firmware for free over the internet |
| Measurements |
169,4 x 97 x 33,2 mm |
| Weight |
460 gr |
| Protection class |
IP 65 |
The functions of MXS Strada Light
 |
| 1 |
6 different icones, for road traffic |
2 |
10 RGB shift lights, free configurable |
3 |
Display pages, free configurable |
| 4 |
Window for information |
5 |
Light-sensor for illumination |
6 |
4 Display Buttons with various functions |
The connectors of MXS Strada Light
 |
| 1 |
4x fixing points, M4 |
2 |
AMP 23 pin, main harness |
3 |
Binder 711 5 pin, mirror camera |
| 4 |
|
|
|
|
|
Highlights AiM MXS Strada Light
 |
 |
 |
Housing
The AiM MXS Strada Light has a black anodized aluminum housing.
|
Software | RaceStudio3
With RaceStudio3 the MXS Strada Light can be configured.
|
Rear view camera
If a rear view camera is connected, the camera image can be shown on the display. |
| |
|
|
 |
 |
 |
Icons
Instead of 6 RGB alarm led's, MXS Strada Light has indicator left/rigt, high beam, light, oil light, water temp and fuel icons. |
Schaltlampen
The 10 RGB shift lights can be set the same for each or all gears. A separate color can be selected for each LED. |
Display
Multiple pages can be configured and displayed on the MXS Strada Light 800x480 TFT. Warnings can also be displayed. |
| |
|
|
 |
 |
 |
Lap times
It can show the lap time, diff +/-, best lap time, lap number and prediction lap time.
|
Data Recall
The data recall shows the most important measurements on the display after the session.
|
Connectors
The MXS Strada Light has a 23-pin AMP connector, as well as a Binder 711 5-pin for the rear view camera.
|
| |
|
|
 |
|
|
Buttons
The MXS Strada Light is operated using the four metal buttons. You can navigate through the menu, switch the display pages or use the data recall. |
|
|
Expansions for AiM MXS Strada Light
 |
Shift Light Module
|
- RGB shift ligts
- Predictive lap time
|
|
more 
|
Accessory for MXS Strada Light
 |
 |
 |
 |
 |
 |
 |
| Fastener syst. |
Temperature |
Movement |
Pressure |
Speed |
Data Hub |
Cable |
 |
 |
|
|
|
|
|
| Lap time |
Connectors |
|
|
|
|
|