Mess- und Prüftechnik für
Industrie, Motorsport und Fahrzeugentwicklung

Sie sind hier: Products > AiM > MXL2 > MXL2


Admeasurements AiM MXL2
Admeasurements AiM MXL2
The MXL2 sports an all new high contrast LCD with an integrated graphical portion, offers a dual color backlight, hosts six configurable RGB alarm LEDs, a 10 LED shift light array, WiFi connectivity, three CAN connections, connections with an industry leading 700+ ECUs. Additionally, a 3-axis accelerometer and gyroscope, 8 analog inputs, 4 digital speed inputs, a lap signal input, and 2 digital outputs, are all standard. All this is housed in a waterproof aluminum chassis with new sealed side-mounted aluminum buttons for quick easy interaction without the need for a PC.

Logo CAN-Bus Technologie
CAN-Bus Technologie

Special Features MXL2

  • 8 free configurable analogue inputs
  • 10 RGB shift-lights
  • 6 RGB alarm-lights 
  • Lap times with up to 5 split times
  • 4 speed inputs
  • Triaxialer acceleration sensor and gyroscope
  • Gear indication
  • Trip- and Odometer
  • 4 GB Storage
  • 3 CAN interfaces
  • ECU Interface (CAN, RS232 or OBDII)

Connection example AiM MXL2

Connection example AiM MXL2

Technical data AiM MXL2

Rev counter Tapping from the control unit, from the clamp 1 of the ignition coil or CAN/RS 232/OBDII
Measuring range 0 bis 22.000 rpm
Scale end setable (x 1000): 4 - 6 - 7 - 8 - 10 - 12 - 14 - 15 - 16 - 18 - 20 - 22
Sampling rate 10 - 50 Hz, free configurable
free configurable over-revs-controll-LED
Speed 4 digital inputs
Capturing over inductive wheel rotational sensor ABS, Speedometer signaler, CAN/RS232/OBDII
0 – 438, indication in km/h or mph
Samplin rate 10 - 100 Hz, free arbitrary
Shift-light 10 free configureable RGB LED's
Time measurement Triggering over Infrared, manual or GPS
Lap times without limit, up to 5 split times
Measuring accuracy 1/100 sec.
Lap time projection, is updated every 100m
Analogue channels 8 Eingänge (0-5 V, 12 bit)
Thermocouple 0 –1200°C, measuring accuracy + 0,75%
Thermoresistor bis 180 °C, measuring accuracy + 1° 6
RGB Alarm-LED's when falling below or exceeding the set alarm values.
Indication in °C oder °F
Sampling rate 1 – 1000 Hz,
free arbitrary Trip- and odometer
Acceleration / Gyroscope triaxial ± 5 g, integrated in display
Sampling rate 10 – 100 Hz, free arbitrary
Gear indication Calculates out of rpm and speed, captures over gear sensor or CAN/RS232/OBDII
Total sampling rate 8950 Hz (without ECU)
Connectors 1x Autosport 37 pin | Souriau 8STA61435SN | Deutsch AS61435SN
1x Autosport 22 pin | Souriau 8STA61235SN | Deutsch AS61235SN
1x Mini USB at harness
Additional functions

Permanent indication of the fastest lap
Indication of the difference to fastest lap with the split times
Two colored background illumination (grey/red)
Light sensor for display illumination
2 digital outputs
Calculated channels

Data storage Non volatile 4GB-Storage
Data transfer WiFi 802.11 or USB
Power supply over 12V on-board power-supply
On / OFF over ignition switch
no data loss after power off
Updates Software- and Firmware updates for free over the internet
Measurements Housing: 190 x 103 x 21 mm
Display: 149.9 x 66.4 mm
Weight 530 gr

The functions of AiM MXL2

Funktionen AiM MXL2
1 6 RGB Alarm-lights, free configurable 2 10 RGB Shift-lights, free configurable 3 Analogue RPM indication, free configurable
4 Gear indication 5 Speed indicatione 6 RPM digital and time difference
7 Free configurable indication, e.g. Track layout 8 4 Display button with various functions 9 Indication of the lap numbers
10 Lap time indication 11 Light sensor for illumination

The Display



The MXL2 Display is segmented in two parts. The small bottom part on the right is free configurable and can either show up to four measuring values or track layouts. Over the dual background-illumination the display is, with set alarm, deposited in red.   The MXL2 has ten shift- and six alarm LEDs. These are in RGB colors free configurable.

The shift LEDs can either be set equal or all gears together the same. For each LED a seperate color can be selected. The alarm LEDs can also be adjusted in the different RGB colors. 
MXL2 Display Hintergrundbeleuchtung   AiM MXL2 Alarm- und Schaltlampen

AiM RaceStudio3 Software for MXL2

AiM RaceStudio3 Software Button

RaceStudio3 is the software for the new generation of the AiM Logger.

Over this software configurations can be created and be transmitted to the device via Wi-Fi or USB. over an online mode the measuring values can be checked or a recording can be started manually.

With RS3 now als math channels can be created, transmitted to the device and indicated on the display.

Accessory for MXL2

AIM Zubehör Befestigung AIM Zubehör Beschleunigung AIM Zubehör Bewegung AIM Zubehör Druck AIM Zubehör Geschwindigkeit AIM Zubehör Hubs AIM Zubehör Kabel
Fastener syst. Acceleration Movement Pressure Speed Data Hub Cable
AIM Zubehör Rundenzeit AIM Zubehör Steckverbinder AIM Zubehör Temperatur
Lap time Connectors Temperature

Software Updates für AIM Produkte Firmware Updates für AIM Produkte AIM Produkte online kaufen

memotec GmbH | Bauwaldstrasse 1 | D-75031 Eppingen | +49.7260.920440 | |