AiM MXK10 Gen4 Farbdisplay
The MXK10 Gen4 is a 5" TFT display with data logging for Kawasaki Ninja ZX-10R motorbikes. It has six configurable RGB alarm LEDs, 10 configurable RGB switch lights, and WiFi connectivity. The kit comes with a GPS module to get lap times and many other important information.
The MXK10 is equipped with a JAE main connector for plug&play connection to the Kawasaki Ninja ZX-10R (* ZX-10R, ZX-10RR, ZX-10R SE models 2011-2015 (4th gen)). The 5-pin 711 connector can be used to connect extensions such as the GPS module, a channel expansion or lambda controller.
The sturdy aluminium housing meets IP65 requirements, making the MXK10 Gen4 suitable for Kawasaki. The integrated buttons can be used to adjust the settings of the MXK10 and switch between the configured pages. You can also choose between street mode or race mode.
CAN-Bus Technology
Special features MXK10 Gen4
- 4 expandable freely configurable analogue inputs
- 10 RGB shift lights
- 6 RGB alarm Leds
- Lap times with up to 5 split times
- 2 speed inputs GPS/ECU
- Triaxial accelerometer and gyroscope
- WiFi connection
- 4 GB memory
- 2 CAN interfaces
- ECU Interface (CAN +|-)
Connection example AiM MXK10 Gen4
Technical data AiM MXK10
| Rev counter |
Pick-up via CAN |
| Time measurement |
Triggering via GPS
Lap times without limit, up to 5 split times
Measuring accuracy 1/100 sec.
Lap time prediction |
| Analogue channels |
4 optional inputs (0-5 V, 12 bit)
Thermocouple 0 -1200°C, measuring accuracy + 0.75%
Thermocouple resistance up to 180 °C, measuring accuracy + 1°.
6 RGB alarm LEDs when the set alarm values are exceeded or not reached
Display in °C or °F
Sampling rate 1 - 200 Hz, freely selectable depending on sensor type
Day and total odometer |
| Speed |
2 digital inputs
Recording via CAN and GPS
Display in km/h or mph |
| Acceleration |
triaxial ± 5 g and gyroscope integrated in display
Sampling rate acceleration sensor 1 - 100 Hz
Sampling rate gyroscope 1 - 50 Hz |
| Gear indication |
Via the CAN stream directly from the ECU |
| Total sampling rate |
8950 Hz (without ECU) |
| Connectors |
1x JAE MX34 16 pin
1x Binder 71 5pin
1x USB Binder 3pin |
| Shift light |
10 freely configurable RGB LEDs
Freely configurable for each gear |
| Additional functions |
Indication of the difference to the fastest lap in the split times
Lap time prediction
Wifi connection
Light sensor for display illumination |
| Data storage |
Non-volatile 4 GB storage |
| Data transfer |
WiFi 802.11 or USB |
| Power supply |
via 12V on-board power supply
On / Off via ignition switch
No data loss after switching off |
| Updates |
Software and firmware updates free of charge via the Internet |
| Measurements |
Housing: 166 x 97 x 23 mm
Display: 152.8 x 91.8 mm |
| Weight |
530 gr |
The functions of MXK10 Gen4
 |
| 1 |
4 Display Button with various functions |
2 |
6 RGB Alarm LED |
3 |
10 RGB Shift Lights, free configurable |
| 4 |
TFT-Display |
5 |
Light-sensor for illumination |
|
|
The connectors of MXK10 Gen4
 |
| 1 |
3x fixing points, M4 |
2 |
Binder 711 3 pin, USB |
3 |
JAE 16 pin, wiring harness |
| 4 |
Binder 711 5 pin, Expansion |
|
|
|
|
The Display
The 5“ TFT color display of the MXK10 Gen.4 has a contrasr of 1000:1 and a brightness of 700 cd/m2 e.g. 1,100 Lumen. Über einen Lichtsensor werden der Kontrast und die Helligkeit stetig der Umgebung angepasst. Over a light-sensor the contrast and the brightness are continuously adjusted to the surrounding. Whether various display pages, warning messages or mathematical channels, all this can be shown on the display.
WiFi connection
Over the secure 802.11 WiFi connection the AiM MXK10 can in conjunction with the RaceStudio3 be configured, calibrated or the data can be downloaded.
AiM RaceStudio3 Software for MXK10
RaceStudio3 is the software for the new generation of AiM loggers.
With this software, configurations can be created and transferred to the device via Wi-Fi or USB. The measured values can be checked via an online mode or a recording can be started manually.
Accessory for MXK10
 |
 |
 |
 |
 |
 |
 |
| Movement |
Data Hub |
Temperature |
Pressure |
Speed |
Cables |
Connectors |
Overview of the TFT Dash logger