Mess- und Prüftechnik für
Industrie, Motorsport und Fahrzeugentwicklung

Sie sind hier: Products > AiM > MXG > MXG 1.3 Strada

MXG 1.3 Strada

AiM MXG 1.3 Strada
AiM MXG 1.3 Strada
AiM MXG 1.3 Strada
AiM MXG 1.3 Strada
AiM MXG 1.3 Strada
AiM MXG 1.3 Strada
AiM MXG 1.3 Strada
AiM MXG 1.3 Strada
Admeasurement AiM MXG 1.3 Strada
Admeasurement AiM MXG 1.3 Strada
The AiM MXG 1.3 Strada is a free configurable 7" TFT display without integrated data recording. It has 8 icons for road traffic, 10 configurable RGB switching lamps, three CAN interfaces and two of them for connecting over 2000 ECU's from the industry's leading ECU manufacturers.  

The basic equipment of the new generation of displays from AiM naturally includes the possibility of connecting an analogue camera that delivers images to the display. It also has 8 analogue inputs, 1 speed input, 3 CAN connections, an input for lap times and 1 digital output as well as an input for a rear view camera. 

All this is housed in a waterproof aluminium case with new sealed aluminium side-mounted buttons for quick and easy interaction without the need for a PC. Any number of display pages can be created and displayed on the AiM MXG 1.3 Strada.

Logo CAN-Bus Technologie
CAN-Bus Technology

Special Features MXG 1.3 Strada

  • 8 free configurable analogue inputs
  • 10 RGB Shift lights
  • 8 icons for road traffic
  • Laptime with up to 5 split times
  • 1 Speed input
  • 3 CAN Interface
  • ECU Interface (CAN, RS232 or OBDII)
  • Input for rear camera

Connection example AiM MXG 1.3 Strada

Connection examples AiM MXG 1.3 Strada

Technical Data AiM MXG 1.3 Strada

Rev counter Tapping from the control unit, from the clamp 1 of the ignition coil or CAN/RS 232/K-Line/OBDII
Measuring range 0 up to 22.000 rpm
Scale end adjustable (x 1000): 4 - 6 - 7 - 8 - 10 - 12 - 14 - 15 - 16 - 18 - 20 - 22
Sampling rate 10 - 50 Hz, free arbitrary
free configurable over-revs-controll-LED
Time measurement Triggering over infrared, manual or GPS
lap times without limit, up to 5 split times
Measuring accuracy 1/100 sec.
Lap time projection
Analogue channels 8 inputs (0-5 V, 12 bit)
Thermocouple 0 -1200°C, measuring accuracy + 0.75% optionally with a TC stroke
Thermocouple resistance up to 180°C, measuring accuracy + 1
8 RGB alarm LEDs when the set alarm values are exceeded or not reached
Display in °C or °F
Sampling rate 1 - 1000 Hz, freely selectable
Day and total odometer
Speed 1 digital input
Acquisition via inductive wheel speed sensor ABS or CAN/RS232/OBDII
0 - 438, display in km/h or mph
Sampling rate 10 - 50 Hz, freely selectable
Calculations Possible with maths channels
Gear indication Calculated from rpm and speed, detected via gear sensor or CAN/RS232/OBDII
Total sampling rate 8950 Hz (without ECU)
Connector 1x AMP 14pin 
1x AMP 23pin 
1x Binder 711 5 pin
1x Mini-USB on the wiring harness
Shift light 10 freely configurable RGB LEDs, optionally gear-dependent
Additional functions Display of the difference to the fastest lap in the split times
Lap time prediction
Brightness sensor for display illumination
1 digital outputs
Calculated channels
Freely configurable display
Data storage Optional with a Strada Logger
Data transfer USB
Power supply via 12V on-board power supply
On / Off via ignition switch
No data loss after switching off
Updates Soft- and Firmware updates for free over the internet
Measurements Gehäuse: 237 x 127.6 x 26 mm
Display: 152.8 x 91.8 mm
Weight 950 gr
Protection class IP 65

The functions of MXG 1.3 Strada

The functions of MXG 1.3 Strada
1 8 different icones, for road traffic 2 10 RGB shift lights, free configurable 3 Display pages, free configurable
4 Window for information 5 Light-sensor for illumination 6 4 Display Buttons with various functions

The connections of the MXG 1.3 Strada

The connections of the MXG 1.3 Strada
1 4x fixing points, M4 2 AMP 23 pin, extension harness 3 AMP 14 pin, main harness
4 Binder 711 5 pin, mirror camera

Highlights AiM MXG 1.3 Strada

Highlights AiM MXT Strada Housing Highlights AiM MXT Strada Software RaceStudio3 Highlights AiM MXT Strada Rear view camera

The AiM MXG Strada has a black anodized aluminum housing.

Software | RaceStudio3

With RaceStudio3 the MXG can be configured.

Rear view camera

If a rear view camera is connected, the camera image can be shown on the display.
Highlights AiM MXT Strada icons Highlights AiM MXT Strada Shift lights Highlights AiM MXT Strada Display

Instead of 8 RGB alarm led's, MXG Strada has indicator left/rigt, high beam, light, oil light, water temp and fuel icons.

The 10 RGB shift lights can be set the same for each or all gears. A separate color can be selected for each LED.

Multiple pages can be configured and displayed on the MXG 800x480 TFT. Warnings can also be displayed.
Highlights AiM MXT Strada Lap times Highlights AiM MXT Strada Data Recall Highlights AiM MXT Strada Connectors
Lap times

It can show the lap time, diff +/-, best lap time, lap number and prediction lap time.

Data Recall

The data recall shows the most important measurements on the display after the session.


The MXG Strada has a 23- and 14-pin AMP connector, as well as a Binder 711 5-pin for the rear view camera.

Highlights AiM MXT Strada Buttons Highlights AiM MXT Strada Acceleration

The MXG Strada is operated using the four metal buttons. You can navigate through the menu, switch the display pages or use the data recall.

The built-in 3D acceleration sensor and gyroscope enable the vehicle's roll, pitch and yaw to be calculated.

Expansions for AiM MXG 1.3 Strada

AiM Data Hub

Data Hub

  • AiM CAN Bus Expansion
  • 4 additional EXP inputs

more more informations for AiM Data Hub

AiM GPS Modul

GPS Module

  • Driven line
  • Lap time
  • Split time
  • Predictive lap time
  • Speed
  • Accelerations

more more informations for AiM GPS Modul



  • Lambda value
  • Lambda probe temp
  • AFR value

more more informations for AiM LCU-2

AiM Channel Expansion

Channel Expansion

  • 4 Analog inputs or
  • 2 Digital inputs

more more informations for AiM Channel Expansion

AiM TC Hub

TC Hub

  • 4 Thermocouple inputs

more more informations for AiM TC Hub

AiM Strada Logger

Strada Logger

  • Memory for Strada Dashes
  • up to 32 GB SD cards 

more more informations for AiM Strada Logger

AiM SmartyCam 3 Dual

SmartyCam 3 Dual

  • Full HD Video
  • Data Overlay
  • 2x bullet cams
  • Video output (SDI)

more more informations for AiM SmartyCam 3 Dual

AiM SmartyCam 3 GP

SmartyCam 3 GP

  • Full HD Video
  • Data Overlay
  • 1x bullet cam
  • Video output (SDI)

more more informations for AiM SmartyCam 3 GP

AiM SmartyCam 3 Corsa

SmartyCam 3 Corsa

  • Full HD Video
  • Data Overlay

more more informations for AiM SmartyCam 3 Corsa

AiM SmartyCam 3 Sport

SmartyCam 3 Sport

  • Full HD Video
  • Data Overlay

more more informations for AiM SmartyCam 3 Sport

AiM Remote Buttons Interface

Remote Buttons Interface

  • 4x Menu buttons
  • 1x Backlight on/off
  • 1x Odometer reset

more more informations for AiM Remote Buttons Interface

AiM Rückfahrkamera

Rear Camera

  • up to 2 pictures
  • Rear view
  • Front view
  • Picture in TFT Dash

more more informations for AiM Rear Camera

AiM Shift Light Modul

Shift Light Module

  • RGB shift ligts
  • Predictive lap time

more more informations for AiM Shift Light Modul

Accessory for MXG 1.3 Strada

AIM accessory fastener systems AIM accessory temperature AIM accessory movement AIM accessory pressure AIM accessory speed AIM accessory hubs AIM accessory cable
Fastener syst. Temperature Movement Pressure Speed Data Hub Cable
AIM accessory lap times AIM accessory connectors
Lap time Connectors

 Software Updates for AiM products  Firmware Updates for AiM products  Buy AiM products online

memotec GmbH | Bauwaldstrasse 1 | D-75031 Eppingen | +49.7260.920440 | |