Admeasurement AiM MXG 1.3 Dash logger
The
AiM MXG 1.3 is a free configurable 7“ TFT-display with integrated data recording. It has 8 configurable RGB alarm-LED’s, 10 configurable RGB shift-lights, WiFi-connection, three CAN connections und two of them to receive data from over 2000 ECUs of the industry-leading ECU manufacturers.
The basic equipment of the new generation of displays from AiM naturally also includes the possibility of connecting an analogue camera that supplies images to the display. It also has 8 analogue inputs, 4 speed inputs, 3 CAN connections, an input for lap times and 2 digital outputs as well as an input for a rear view camera.
All this is housed in a waterproof aluminium case with new sealed aluminium side-mounted buttons for quick and easy interaction without the need for a PC. Any number of display pages can be created and displayed on the AiM MXG 1.3.
CAN-Bus Technology
Special features MXG 1.3
- 8 free configurable analogue inputs
- 10 RGB Shift lights
- 8 RGB Alarm lights
- Lap time with up to 5 split times
- 4 speed inputs
- WiFi connection
- 4 GB Storage
- 3 CAN interfaces
- ECU Interface (CAN, RS232, OBDII
- Input for rear camera
Connection example AiM MXG 1.3
Technical Data AiM MXG 1.3
| Rev counter |
Tapping from the control unit, from the clamp 1 of the ignition coil or CAN/RS 232/OBDII
Measuring range 0 up to 22.000 rpm
Scale end adjustable (x 1000): 4 - 6 - 7 - 8 - 10 - 12 - 14 - 15 - 16 - 18 - 20 - 22
Sampling rate 10 - 50 Hz, free arbitrary
free configurable over-revs-control-LED |
| Time measurement |
Triggering over infrared, manual or GPS
lap times without limit, up to 5 split times
Measuring accuracy 1/100 sec.br />Lap time projection |
| Analogue channels |
8 inputs (0-5 V, 12 bit)
Thermocouple 0 –1200°C, Measuring accuracy + 0,75% , optional with TC-Hub
Thermo resistance up to 180 °C, measuring accuracy + 1°
8 RGB Alarm-LED's when falling below or exceeding the set alarm values
Indication in °C or °F
Sampling rate 1 – 1000 Hz, free arbitrary
Trip and total odometers |
| Speed |
4 digital inputs
Recording over inductive wheel rotational sensor ABS, CAN/RS232/OBDII
0 – 438, Indication in km/h or mph
Sampling rate 10 - 50 Hz, free arbitrary |
| Calculations |
With mathematical channels possible |
| Gear indication |
Calculates out of rpm and speed, captures over gear sensor or CAN/RS232/OBDII |
| Total sampling rate |
8950 Hz (without ECU) |
| Connector |
1x Autosport 37 pin | Souriau 8STA61435SN | Deutsch AS61435SN
1x Autosport 22 pin | Souriau 8STA61235SN | Deutsch AS61235SN
1x Binder 711 5 pin
1x Mini USB on the wiring harness |
| Shift Light |
10 free configurable RGB LED's
for each gear free configurable |
| Additional function |
Indication of the difference to fastest lap with the split times
Lap time projection
Wifi connection
Light sensor for display illumination
2 digital outputs
Calculated channels
Free configurable indication |
| Data Storage |
non volatile 4 GB-Speicher |
| Data transfer |
WiFi 802.11 oder USB |
| Power supply |
over 12V on-board power supply
On / Off over ignition switch
no data loss after power-off |
| Updates |
Software- and Firmware for free over the internet |
| Measurements |
Housing: 237 x 127,6 x 26 mm
Display: 152,8 x 91,8 mm |
| Weight |
950 gr |
| Protection class |
IP 65 |
The functions of MXG 1.3
 |
| 1 |
8 RGB Alarm lights, free configurable |
2 |
10 RGB shift lights, free configurable |
3 |
Display pages, free configurable |
| 4 |
Window for information |
5 |
Light-sensor for illumination |
6 |
4 Display Buttons with various functions |
The connectors of MXG 1.3
 |
| 1 |
4x fixing points, M4 |
2 |
Deutsch AS 37 pin, main harness |
3 |
Deutsch AS 22 pin, extension harness |
| 4 |
Binder 711 5 pin, mirror camera |
|
|
|
|
Highlights AiM MXG 1.3
 |
 |
 |
Housing
The AiM MXG has a black anodized aluminum housing.
|
Software | RaceStudio3
With RaceStudio3 the MXG can be configured, the recorded data can be downloaded and analyzed.
|
Rear view camera
If a rear view camera is connected, the camera image can be shown on the display.
|
| |
|
|
 |
 |
 |
Alarm lights
The 8 RGB alarm led's can either light up, flash slowly or quickly when a set min. or max value is reached.
|
Schaltlampen
The 10 RGB shift lights can be set the same for each or all gears. A separate color can be selected for each LED.
|
Display
Multiple pages can be configured and displayed on the MXG's 800x480 TFT. Warnings can also be displayed.
|
| |
|
|
 |
 |
 |
Lap times
It can show the lap time, diff +/-, best lap time, lap number and prediction lap time.
|
Data Recall
The data recall shows the most important measurements on the display after the session.
|
Connectors
The MXG has a 37- and 22-pin DEUTSCH AS connector, as well as a Binder 711 5-pin for the rear view camera.
|
| |
|
|
 |
 |
 |
Buttons
The MXG is operated using the four metal buttons. You can navigate through the menu, switch the display pages or use the data recall.
|
WiFi connection
The MXG can be configured, calibrated or the data downloaded in conjunction with RaceStudio3 via the secure 802.11 WiFi connection.
|
Acceleration
The built-in 3D acceleration sensor and gyroscope enable the vehicle's roll, pitch and yaw to be calculated.
|
Expansions for AiM MXG 1.3 Race
 |
Shift Light Module
|
- RGB shift ligts
- Predictive lap time
|
|
more 
|
Accessory for MXG 1.3
 |
 |
 |
 |
 |
 |
 |
| Fastener syst. |
Temperature |
Movement |
Pressure |
Speed |
Data Hub |
Cable |
 |
 |
|
|
|
|
|
| Lap time |
Connectors |
|
|
|
|
|
Overview of the Dash loggers
|
 |
 |
 |
 |
| MXT 1.3 | MXG 1.3 | MXP 1.3 | MXS 1.3 |
|---|
| Supply |
| Power supply |
9 - 15 VDC |
9 - 15 VDC |
9 - 15 VDC |
9 - 15 VDC |
| Power consumption mA (max.) |
450 |
400 |
400 |
400 |
| Inputs |
| Analog [optional] |
8 [40] |
8 [40] |
8 [40] |
8 [40] |
| Analog 0 - 5 V |
x |
x |
x |
x |
| Analog 0 - 12 V |
x |
x |
x |
x |
| ECU channels [max.] |
120 |
120 |
120 |
120 |
| Digital [optional] |
6 [24] |
6 [24] |
6 [24] |
6 [24] |
| Thermocouple [optional] |
- [40] |
- [40] |
- [40] |
- [40] |
| Speed |
4 |
4 |
4 |
4 |
| Lap time GPS |
x |
x |
x |
x |
| Lap time optical |
x |
x |
x |
x |
| Lap time magnetic |
- |
- |
- |
- |
| Rear view camera |
2 |
2 |
2 |
2 |
| Keyboard external |
o [RBI] |
o [RBI] |
o [RBI] |
o [RBI] |
| RPM via ignition |
x |
x |
x |
x |
| Outputs |
| Signal / Digital |
2 |
2 |
2 |
2 |
| CAN |
2 |
2 |
2 |
2 |
| Reference voltage |
5V |
5V |
5V |
5V |
| Communication |
| CAN Interface |
3 |
3 |
3 |
3 |
| K-Line |
1 |
1 |
1 |
1 |
| RS232 |
1 |
1 |
1 |
1 |
| USB |
x |
x |
x |
x |
| WiFi |
x |
x |
x |
x |
| Memory |
| Storage in GB [optional] |
4 [32] |
4 [32] |
4 [32] |
4 [32] |
| Total sampling rate |
8950 |
8950 |
8950 |
8950 |
| Sampling rate per channel |
bis zu 1.000 Hz |
bis zu 1.000 Hz |
bis zu 1.000 Hz |
bis zu 1.000 Hz |
| Other |
| Acceleration sensor |
tri-axial ± 5g |
tri-axial ± 5g |
tri-axial ± 5g |
tri-axial ± 5g |
| Gyroscope |
tri-axial ± 90°/s |
tri-axial ± 90°/s |
tri-axial ± 90°/s |
tri-axial ± 90°/s |
| Connector |
DEUTSCH 37 & 22 pin
Binder 711 5 pin |
DEUTSCH 37 & 22 pin
Binder 711 5 pin |
DEUTSCH 37 & 22 pin
Binder 711 5 pin |
DEUTSCH 37 & 22 pin
Binder 711 5 pin |
| MOT approval |
o |
o |
o |
o |
| Display |
1280 x 480, 10" TFT |
800 x 480, 7" TFT |
800 x 480, 6" TFT |
800 x 480, 5" TFT |
| Alarm lights |
6 RGB |
8 RGB |
5 RGB |
6 RGB |
| Shift lights |
10 RGB |
10 RGB |
10 RGB |
10 RGB |
| Math. channels |
x |
x |
x |
x |
| Ambient light sensor |
x |
x |
x |
x |
| Admeasurements |
278 x 135 x 43,2 mm |
237 x 127,6 x 26 mm |
189,6 x 106,4 x 24,9 mm |
169,4 x 97 x 23 mm |
| Weight |
1.200 gr |
950 gr |
740 gr |
530 gr |
| Protection class |
IP65 |
IP65 |
IP65 |
IP65 |
| Expansion |
| GPS |
o |
o |
o |
o |
| Lambda |
o |
o |
o |
o |
| Displays |
o |
o |
o |
o |
| SmartyCam |
o |
o |
o |
o |
| TC-Hub |
10 |
10 |
10 |
10 |
| Channel Expansion / ACC |
10 |
10 |
10 |
10 |
| Shift Light Module |
o |
o |
o |
o |
| Memory Module |
o |
o |
o |
o |
| Remote Buttons Interface |
o |
o |
o |
o |
| RIO02 |
o |
o |
o |
o |
x = Standard | o = optional | - = not possible | digit = Number