Mess- und Prüftechnik für
Industrie, Motorsport und Fahrzeugentwicklung

Sie sind hier: Products > AiM > MXG > MXG


AiM MXG colour dash
AiM MXG colour dash
AiM MXG colour dash
AiM MXG colour dash
AiM MXG colour dash
AiM MXG colour dash
AiM MXG colour dash
AiM MXG colour dash
Admeasurements AiM MXG colour dash
Admeasurements AiM MXG colour dash
The AiM MXG is a big free configurable 7“ TFT-display with integrated data recording. It has eight configurable RGB alarm-LED’s, 10 configurable RGB shift-lights, WiFi-connection, three CAN connections and a connection to over 700 ECU manufacturers. Additionally it has 3-axle-acceleration sensors and gyroscope, 8 analogue inputs, 4 speed inputs, one input for lap times and 2 digital outputs.

All this is placed in a waterproof aluminum housing with new sealed, on the side affixed aluminum buttons for the fast and easy interaction without the necessity of a PC. It is possible to create arbitrary displays pages and show on the MXG.

Logo CAN-Bus Technologie
CAN-Bus Technology

Special features MXG

  • 8 free configurable analogue inputs
  • 10 RGB Shift lights
  • 8 RGB Alarm lights
  • Lap times with up to 5 split times
  • 4 speed inputs
  • Triaxial acceleration sensor and gyroscope
  • WiFi connection
  • 4 GB Storage
  • 3 CAN interfaces
  • ECU Interface (CAN, RS232 or OBDII)

Connection example AiM MXG

Connection example AiM MXG

Technische Daten AiM MXG

Rev counter Tapping from the control unit, from the clamp 1 of the ignition coil or CAN/RS 232/OBDII
Measuring range 0 up to 22.000 rpm
Scale end adjustable (x 1000): 4 - 6 - 7 - 8 - 10 - 12 - 14 - 15 - 16 - 18 - 20 - 22
Sampling rate 10 - 50 Hz, free arbitrary
free configurable over-revs-controll-LED
Speed 4 digital inputs
Recording over inductive wheel rotational sensor ABS, CAN/RS232/OBDII
0 – 438, Indication in km/h or mph
Sampling rate 10 - 50 Hz, free arbitrary
Shift light 10 free configurable RGB LED's
For each gear free configurable
Time measurement Triggering over infrared, manual or GPS
lap times without limit, up to 5 split times
Measuring accuracy 1/100 sec.
Lap time projection
Analogue channels 8 inputs (0-5 V, 12 bit)
Thermocouple 0 –1200°C, Measuring accuracy + 0,75%
Thermo resistance up to 180 °C, measuring accuracy + 1°
6 RGB Alarm-LED's when falling below or exceeding the set alarm values
Indication in °C or °F
Sampling rate 1 – 1000 Hz, free arbitrary
Acceleration / Gyroscope triaxial ± 5 g + gyro, integrated in the display
sampling rate acceleration 1 – 100 Hz, free arbitrary
sampling rate gyro 1 – 50 Hz, free arbitrary
Gear indication Calculates out of rpm and speed, captures over gear sensor or CAN/RS232/OBDII
Total sampling rate 8950 Hz (without ECU)
Connector 1x Autosport 37 pin | Souriau 8STA61435SN | Deutsch AS61435SN
1x Autosport 22 pin | Souriau 8STA61235SN | Deutsch AS61235SN
1x Mini USB on the wiring harness
Additional functions

Indication of the difference to fastest lap with the split times
Lap time projection
Wifi Connection
Light sensor for display illumination
2 digital outputs
Calculated channels
Free configurable indication

Data storage Non volatile 4GB-storage
Data transfer WiFi 802.11 or USB
Power supply over 12V on-board power supply
On / OFF over ignition switch
no data loss after power off
Updates Software- and Firmware updates for free over the internet
Measurements Housing: 237 x 127.6 x 26 mm
Display: 152.8 x 91.8 mm
Weight 950 gr

The functions of MXG

Funktionen AiM MXG
1 8 RGB Alarm lights, free configurable 2 10 RGB shift lights, free configurable 3 Gear indication
4 Speed indication 5 RPM digital 6 Analogue rpm indication, free configurable
7 Lap number and lap time functions 8 4 Display Buttons with various functions 9 Indication of the analogue channels
10 Window for information 11 Light-sensor for illumination

The Display

AiM MXG Display Funktionen
The free configurable 7“ TFT color display of the MXG has a contrast of 1000:1 and a brightness of 700 cd/m² e.g. 1,100 lumen. Over a light-sensor the contrast and the brightness are continuously adjusted to the surrounding. Whether various display pages, warning messages or mathematical channels, all this can be shown on the display.

WiFi connection

AiM MXG WiFi Verbindung
Over the secure 802.11 WiFi connection the MXG can in conjunction with the RaceStudio3 be configured, calibrated or the data can be downloaded.

MXG RGB alarm- and shift-lights

RGB Lampen AiM MXG
The AiM MXG dash-logger has ten shift- and eight alarm-lights. These are in RGB colors free configurable.

The shift-lights can be set same either for each or for all gears. Each LED has its own selectable color.

The eight alarm-lights can when reaching one of the set min- or max. value either gleam, flash slow or fast. Additional a message can be shown on the display or a signal can be given.

The alarm-lights can also be set in the various RGB Colors

Accessory for MXG

AIM Zubehör Befestigung AIM Zubehör Beschleunigung AIM Zubehör Bewegung AIM Zubehör Druck AIM Zubehör Geschwindigkeit AIM Zubehör Hubs AIM Zubehör Kabel
Fastener syst. Acceleration Movement Pressure Speed Data Hub Cable
AIM Zubehör Rundenzeit AIM Zubehör Steckverbinder AIM Zubehör Temperatur
Lap time Connectors Temperature

Software Updates für AIM Produkte Firmware Updates für AIM Produkte AIM Produkte online kaufen

memotec GmbH | Bauwaldstrasse 1 | D-75031 Eppingen | +49.7260.920440 | |