The AiM
MX2E is a Plug & Play 6" TFT-Display with integrated data recording which was specially developed for the Lotus Elise/Exige. It is compatible with model years 2004-2007 (version with airbag), 2008-2010 and 2011-2020 (only with Toyota engine).
The AiM
MX2E has an integrated Lap timer, WiFi connection, ECU interface and 18 integrated LEDs (10 shift lights, 6 status information LEDs, 2 LEDs for flashing direction). In addition, it has a 3-axis acceleration sensor and gyroscope, rear view camera connection, 14 digital switch inputs, 4 integrated buttons in the cover.
All this is housed in a waterproof aluminium casing, the buttons are placed on the side of the dashboard cover for quick and easy interaction without the need for a PC. Various display pages can be created and shown on the MX2E.
CAN-Bus Technology
Special features MX2E
- Plug&Play Lotus Elise/Exige
- 10 RGB Shift lights
- 6 RGB Status lights
- Lap times with up to 5 split times
- integrated GPS-Antenna
- Triaxial acceleration sensor and gyroscope
- WiFi connection
- 4 GB storage
- CAN interface for AiM devices
- ECU Interface
Connection example AiM MX2E
Technical Data AiM MX2E
| Rev counter |
Tapping from the control unit via CAN bus technology
RGB-swicthing lights adjustable
Free configurable over-revs-control-LED |
| Time measurement |
Triggering over GPS
Lap times without limit, up to 5 split times
Measuring accuracy 1/100 sec.
Lap time projection |
| Alarm lights |
6 RGB Status-LED's
2 LED´s flashing direction indicator
10 LED Shift lights
Trip- and total odometer |
| Speed |
Tapping from the control unit over CAN bus Technology
integrated GPS-Antenna
0 – 438, indication in km/h or mph |
| Acceleration |
triaxial ± 5 g and Gyroscope integrated in the display |
| Connector |
1xPlug&Play Lotus Elise/Exige
1x 711 for GPS-Antenna
1x 711 for button left
1x 711 for button right
1x 711 for rear camera |
| Shift light |
10 free configurable RGB LED's
free configurable for each gear |
| Additional functions |
Indication of the difference to the fastest lap with the split times
Lap time projection
WiFi connection
Light sensor for display illumination
Free configurable indication |
| Data storage |
non-volatile 4 GB-storage |
| Data transfer |
WiFi 802.11 |
| Power supply |
over 12V on-board power supply
On / Off over ignition switch
no data loss after power off |
| Updates |
Software- and Firmware updates for free over the internet |
| Compatibility |
2004-2007 only version with Airbag in connection with adapter wiring 2008-2010 and 2011-2020 only with Toyota Engine |
| Weight |
400 gr |
The functions of MX2E
 |
| 1 |
Indicator lights |
2 |
10 RGB shift lights,
free configurable |
3 |
6 RGB Status lights |
| 4 |
Display pages,
free configurable |
5 |
Light sensor for illumination |
6 |
Window for information |
The connections of MX2E
 |
| 1 |
4x fixing points, M4 |
2 |
Delphi 24 pin, main harness |
3 |
Binder 711 5 pin,
right Knbuttons |
| 4 |
Binder 711 5 pin,
expansions |
5 |
Binder 711 5 pin,
left buttons |
6 |
Binder 711 5 pin,
mirror camera |
The Display
The differently configurable 6" TFT colour display of the MX2E has a contrast of 600:1 and a brightness of 700 cd/m2 or 1,100 lumens. A light sensor constantly adjusts the contrast and brightness to the surroundings. Wether different display pages or warning messages, all this can be shown on the display.
WiFi Connection
The AiM MX2E can be configured, calibrated or the data downloaded via the secure 802.11 WiFi connection in conjunction with RaceStudion3.
MX2E RGB Alarm- and Shift lights
The AiM MX2E Dash Logger has ten switching lamps. These are freely configurable in RGB colours.
The shift lights can be set to the same colour for each gear or for all gears. A seperate colour can be selected for each LED.
AiM RaceStudio3 Software for MX2E
RaceStudio3 is the Software for the current generation of the AiM Logger.
This software can be used to create configurations and transfer them to the unit via USB. The measured values can be checked via an onlibe mode or a recording can be started manually.
With RS3, mathematical channel can now also be created, transmitted to the unit an shown on the display.
Accessory for MX2E
 |
 |
 |
 |
 |
 |
 |
| Fastener syst. |
Temperature |
Movement |
Pressure |
Speed |
Data Hub |
Cable |
 |
 |
|
|
|
|
|
| Lap time |
Connectors |
|
|
|
|
|
Overview Dash logger
|
 |
 |
| MX2E | MXP 1.3 |
|---|
| Supply |
| Power supply |
9 - 15 VDC |
9 - 15 VDC |
| oer consumption mA (max.) |
400 |
400 |
| Inputs |
| Analogue [optional] |
0 [4] |
4 [40] |
| ECU (CAN) |
36 |
120 |
| Digital [optional] |
0 [2] |
6 [24] |
| Thermocouple [optional] |
0 [48] |
0 [48] |
| Speed |
x |
4 |
| Keyboard external |
x |
optional |
| Outputs |
| Signal |
o |
2 |
| Reference voltage |
5V |
5V |
| Communication |
| CAN Interface |
2 |
3 |
| K-Line |
- |
x |
| RS232 |
- |
x |
| USB |
- |
x |
| Lap time |
x |
x |
| Storage |
| Storage in GB [optional] |
4 [-] |
4 [32] |
| Total sampling rate |
8.950 |
8,950 |
| Sampling rate per cahnnel |
up to 500 Hz |
up to 1.000 Hz |
| Other |
| Acceleration sensor |
- |
- |
| Connector |
Delphi 24 pin
Binder 711 5 pin |
DEUTSCH 37 &22 pin
Binder 711 5 pin |
| MOT |
x |
o |
| Measurement |
191 x 114.2 x 26.4 mm |
189.6 x 106.4 x 24.9 |
| Weight |
640 gr |
640 gr |
| Protection class |
IP65 |
IP65 |
| Expansion |
| GPS |
x |
o |
| Lambda |
o |
o |
| Displays |
- |
o |
| SmartyCam |
o |
o |
| TC-Hub |
1 |
10 |
| Channel Expansion |
- |
10 |
| Memory Module |
- |
o |
| Remote Control Modul |
o |
o |
| Shift Light Modul |
o |
o |
| RIO02 |
- |
o |
x = Standard | o = optional | - = not possible | digit = Number