AIM is offering the TC Hub, to record the measurement values of 4 thermocouples and to forward them to the Logger. Thereby the TC Hub is placed in the near of the measuring points, which saves wiring effort and weight, because from the Hub there is one single cable leading to next CAN-knot.
Typical application are therefore axial wise measuring of the brake discs- and surface temperature or the recording of exhaust gas temperature of 4 cylinders each. The TC Hub has at all 4 inputs thermocouple- multiplier for type K-sensors. Each sensor can be sampled with up to 100 Hz.
CAN-Bus Technologie
Special features TC Hub
- Expands your AIM product to 4 further thermocouples
- Solid aluminum housing
- Dimensions: 105 x 33 x 28 mm
- Weight: 170 gram
- Sampling rate: configurable up to 100 Hz
Connection example TC Hub
Technical data Thermocouple Hub
| | Thermocouple Hub |
|---|
| Connections |
4x Binder bushing 711, 3-pin - w.
1x Binder connector 711, 5-pin - m. |
| Admeasurements |
105 x 33 x 28 mm |
| Cable length |
150 cm |
| Housing |
aluminium, anodized |
| Weight |
170 gr |
The inputs on the TC Hub
 |
| 1 |
Fixing points for M6 screws |
2 |
#1 thermocouple input |
3 |
#2 thermocouple input |
| 4 |
#3 thermocouple input |
5 |
#4 thermocouple input |
6 |
Connections to the AIM Master |
Accessory TC Hub
 |
|
|
|
|
|
|
| Temperature |
|
|
|
|
|
|