Abmasse AIM Data Hub 4-fach
The
Data Hub is a multi socket for the parallel connection from up to 4 CAN-components to the AIM-CAN-network. Connected Slaves (GPS05, Lambda, MemoryKey, e-Box, evo4, SmartyCam, etc.) communicate over this Hub with the AIM loggers MXL, evo3 pista, evo3 pro, evo4 and MyChron 4. Thanks to this solution unnecessary wiring can be dropped, which had to be installed earlier.
On each
Data Hub two/four Slaves can be connected e.g. three/one, to connect a
Data Hub in series, when there is the need for further slaves. The Logger recognizes automatically which devices are connected to the Hub, there is no need for a bigger configuration effort. The 2xData Hub has additional a 12V cable, wherewith it is optimally suitable on the Kart.
CAN-Bus Technology
Special features Data Hub
- Connects several AiM devices with each other
- Four further AIM CAN connections
- Small design
Connection example Data Hub
Technische Daten Data Hub
| Data Hub 4-fach | Data Hub 2-fach |
Connections |
4x Binder bushing 711, 5-pin - w. 1x Binder connector 711, 5-pin - m. (1x Deutsch DTM 6-pin - m.) |
2x Binder bushing 711, 5-pin - w. 1x Binder connector 711, 5-pin - m. 1x 12V - connection cable |
Dimensions |
123 x 30 x 23.5 mm |
70 x 30 x 23.5 mm |
Cable length |
40 oder 150 cm |
150 cm |
Weight |
97 gram |
86 gram |
Iputs Data Hub
|
1 |
Fixing points for M6 screws |
2 |
#1 CAN-connection for further Slaves |
3 |
#2 CAN-connection for further Slaves |
4 |
#3 CAN-connection for further Slaves |
5 |
#4 CAN-connection for further Slaves |
6 |
Connection to AIM Master |
Which Slaves you plug into which input doesn’t matter, because the devices are recognized automatically.
Compatibility Data Hub
|
|
|
|
|
|
|
Channel Expansion |
Data Key Memory Key |
e-Box eXtreme |
e-Box gold |
ECU Bridge |
evo3 |
evo4 |
|
|
|
|
|
|
|
Formula Wheel |
GPS05 Modul |
GT Wheel |
LCU-2 |
M3 Dash |
MXL |
MyChron4 |
|
|
|
|
|
|
|
MyChron Expansion |
RPM Bridge |
SmartyCam |
SmartyCam GP |
TC Hub |
TG Dash |
|